AmScope, H800-CL, 1X-7X Zoom Monocular Inspection Microscope with Coaxial Lighting
H800-CL Includes Only:
- One monocular zoom microscope
- One focusing block
- One base plate for table-stand
- One column for table-stand
- One hex wrench
- Three screws and washers
- One dust cover
- One coaxial light attachment
- One power supply for coaxial light
The H800-CL is designed specifically for photomicrography, providing 1X-7X zoom magnification and a C-Mount interface for most professional microscope cameras. While stereo microscopes are the preferred choice for low-magnification work like micro-soldering and dissection, the stereo lens design is not optimal for producing accurate photos or videos due to off-axis, angular distortion and keystoning. This single-lens microscope provides the same magnification range, but without the distortion. The microscope is equipped with integrated coaxial lighting which can illuminate highly-reflective surfaces that off-axis lighting cannot.
The 1X-7X zoom objective lens produces exceptionally sharp images throughout the entire range. The C-Mount camera interface is height-adjustable, allowing precise parfocal adjustments to keep the lens in focus throughout the zoom range. The microscope has an integrated 0.4X reduction element optimized for cameras using 1/2" format sensors, providing more field-of-view.
This package includes a table-stand with an 11" pillar and a focusing block. The focusing block uses a model-specific collar for mounting the lens, and symmetrical, tension-adjustable coarse focus knobs. The large base provides ample working area and stability.
This model uses integrated coaxial lighting to project light onto the subject perfectly inline with the microscope's optics. This results in flat lighting of surfaces perpendicular to the microscope, eliminating dark spots caused by off-axis lighting. When viewing highly-reflective surfaces, off-axis lighting is reflected outside of the microscope's field-of-view. By channeling light axially through the microscope's optics, these reflective surface can be fully illuminated and reflect back into the microscope. This is achieved by mounting a light-source on the microscope at 90, and using a beam-splitter to redirect the light at an orthogonal angle.
Features:
- Zoom microscope objective: 1X-7X
- Optical Correction: Semi-apochromatic
- Mount: C-Mount with integrated 0.4X reduction
- Working distance: 100mm
- Metal Stand Base: 12 5/8" x 10 1/4"
- Pillar: 11" (280mm) long, 1.25" (32mm) Diameter
- Light Power: 110-240V, 50-60HZ, auto-switching wide-band
