Buy HM Digital PS-202, Dual Display TDS Controller

info@PrimeLabMed.com

1-855-590-6919
1-908-282-3482 (Intl.)

The PS-202 allows for continuous and simultaneous monitoring and control of TDS levels on two water lines for high output commercial systems.

Features:

Simultaneously monitors and controls the TDS levels of two water lines (e.g., the feed water and product water) for high output commercial systems.
Large, bright L.E.D. displays.
An alarm will sound if the TDS level rises above the user-set level for both lines
Includes two 1/2" Sensor probes

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Return and Warranty

Please note that return requests for HM Digital items must be submitted within 14 days after the delivery date.

Range	0 - 999ppm
Accuracy	-+2%
Conversion Factor	NaCl (avg. 0.5)
Resolution	1 PPM
ATC	Yes (1 - 65 degrees Celsius)
Calibration	Adjustable
Setting	Controlled by on-screen up/down buttons
Relay Control	The unit will open or close a circuit via dry contacts when the ppm level of the output water (line 2) or input water (line 1) reaches or exceeds its control setting (simple switch). The PS-202 can be used to control one or two pumps, solenoid valves or other device.
Relay Voltage	5V
Alarm	Steady beep for both lines
Display	Bright 5/8"L.E.D. dual displays
2 Probes	1/2"bushing (NPT), 3 meter (9.8 ft) shielded cable
Power Source	AC 110V / AC 220V
Dimensions	9.4 x 9.4 x 12.5 cm (3.7 x 3.7 x 4.9 in.)
Monitor Weight	569.8 g (1 lb 4.1 oz)
Total Weight	938.4 g (2 lbs 1.1 oz)

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Range	0 - 999ppm
Accuracy	-+2%
Conversion Factor	NaCl (avg. 0.5)
Resolution	1 PPM
ATC	Yes (1 - 65 degrees Celsius)
Calibration	Adjustable
Setting	Controlled by on-screen up/down buttons
Relay Control	The unit will open or close a circuit via dry contacts when the ppm level of the output water (line 2) or input water (line 1) reaches or exceeds its control setting (simple switch). The PS-202 can be used to control one or two pumps, solenoid valves or other device.
Relay Voltage	5V
Alarm	Steady beep for both lines
Display	Bright 5/8"L.E.D. dual displays
2 Probes	1/2"bushing (NPT), 3 meter (9.8 ft) shielded cable
Power Source	AC 110V / AC 220V
Dimensions	9.4 x 9.4 x 12.5 cm (3.7 x 3.7 x 4.9 in.)
Monitor Weight	569.8 g (1 lb 4.1 oz)
Total Weight	938.4 g (2 lbs 1.1 oz)

Please note that return requests for HM Digital items must be submitted within 14 days after the delivery date.

Note: Please read description carefully. Do not base your order on the picture presented.