Prime Lab Med
1-855-590-6919
1-908-282-3482 (Intl.)

Millipore CGEP01TP3 SHF Cartridge Filter, Length 10", Silicone Seal

Overall Length: 10"
  • Brand Millipore
  • Part # CGEP01TP3
  • Condition
    Brand New
  • Not for Export

Contact Us For Pricing

Availability
Contact Us
Export
Not for Export
Check Availability
Quantity
Share:

Options and Related Products

Overall Length:
Overall Length: 10"

Millipore, CGEP01TP3, SHF Cartridge Filter, Pore Size 0.2 Um, Cartridge Nominal Length 10", Code 0 (2-222; O-Ring), Silicone Seal

Features:

  • Organism Retention: Microorganism
  • Mode of Action: Filtration (size exclusion)
  • Application: BioProcessing
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer wetting instructions of Filters with MILLIPORE EXPRESS Membrane user guide
  • Storage Statement: Please refer Filters with MILLIPORE EXPRESS Membrane user guide
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Preparation Note

  • Sterilization Method
  • 25 forward or 22 forward and 3 reverse SIP cycles of 30 min at 135 °C; 25 autoclave cycles of 60 min at 126 °C
  • This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Analysis Note

  • Bacterial Retention
  • TOC/Conductivity
  • After sterilization and a controlled water flush of 10 L, samples exhibited less than 500 ppb TOC per USP <64> and less than 1.3 µS/cm per USP <64> at 25 °C.
  • Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥1 L
Report incorrect product information
See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Authorized Distributor
Notifications This product is prohibited for export and is subject to export control laws and regulations of the U.S. Government. Please review our Export Policy.
Declaration
Declaration This product cannot be drop-shipped to residential areas. Please provide a business address upon purchasing.
All sales are final
All sales are final
  • These are made-to-order items.
  • This product is not eligible for return or exchange unless defective.
  • The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for Millipore items must be submitted within 14 days after the delivery date.

Technical Details

Reviews
Device ConfigurationCartridge
Maximum Inlet Pressure, bar (psi)Forward - 7 bar (100 psi) at 25 °C; 1.7 bar (25 psi) at 80 °C; 0.35 bar (5 psi) at 135 °C; Reverse - 2.07 bar (30 psi) at 25 °C; 0.07 bar (1 psi) at 135 °C
Cartridge CodeCode 0 (2-222) O-rings
Quality LevelMQ400
Bacterial EndotoxinsAqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Sterilization25 forward or 22 forward and 3 reverse SIP cycles of 30 min at 135 °C; 25 autoclave cycles of 60 min at 126 °C
Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration
WettabilityHydrophilic
Pore Size0.2 µm
Air Diffusion at 23 °C≤30 mL/min at 2.75 bar (40 psig) in water
Bubble Point at 23 °C≥4000 mbar (58 psig) air with water
Cartridge Nominal Length10 in. (25 cm)
Diameter6.9 cm (2.7 in.)
Filtration Area0.54 m2
Device Size10 in.
ChemistryPolyethersulfone (PES)
Device MaterialPolypropylene/Polysulfone
Seal MaterialSilicone (SI)
Support MaterialPolypropylene
Product Details
Device ConfigurationCartridge
Maximum Inlet Pressure, bar (psi)Forward - 7 bar (100 psi) at 25 °C; 1.7 bar (25 psi) at 80 °C; 0.35 bar (5 psi) at 135 °C; Reverse - 2.07 bar (30 psi) at 25 °C; 0.07 bar (1 psi) at 135 °C
Cartridge CodeCode 0 (2-222) O-rings
Quality LevelMQ400
Bacterial EndotoxinsAqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Sterilization25 forward or 22 forward and 3 reverse SIP cycles of 30 min at 135 °C; 25 autoclave cycles of 60 min at 126 °C
Bacterial RetentionSamples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration
WettabilityHydrophilic
Pore Size0.2 µm
Air Diffusion at 23 °C≤30 mL/min at 2.75 bar (40 psig) in water
Bubble Point at 23 °C≥4000 mbar (58 psig) air with water
Cartridge Nominal Length10 in. (25 cm)
Diameter6.9 cm (2.7 in.)
Filtration Area0.54 m2
Device Size10 in.
ChemistryPolyethersulfone (PES)
Device MaterialPolypropylene/Polysulfone
Seal MaterialSilicone (SI)
Support MaterialPolypropylene
Return and Warranty

Return and Warranty

Please note that return requests for Millipore items must be submitted within 14 days after the delivery date.
Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Reviews

Prime Lab Med
1-855-590-6919
1-908-282-3482 (Intl.)