Prime Lab Med
1-855-590-6919
1-908-282-3482 (Intl.)

Millipore KHGEA1THH1 Opticap Filter XLT 10 SHC, Inlet 5/8", 10"

Diameter: Inlet Connection 5/8"
  • Brand Millipore
  • Part # KHGEA1THH1
  • Model # Opticap
  • Condition
    Brand New
  • Not for Export

Contact Us For Pricing

Availability
Contact Us
Export
Not for Export
Check Availability
Quantity
Share:

Options and Related Products

Diameter:
Diameter: Inlet Connection 5/8"

Millipore, KHGEA1THH1, Opticap Filter XLT 10 Express SHC, Inlet Connection Diameter 5/8", Pore Size 0.5/0.2 Um, Cartridge Nominal Length 10"

Features:

  • Organism Retention: Microorganism
  • Mode of Action: Filtration (size exclusion)
  • Application: BioProcessing
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer installation section of OPTICAP XL Capsules and OPTICAP XLT Capsules user guide
  • Storage Statement: Store in dry location
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Preparation Note

  • Sterilization Method
  • 3 autoclave cycles of 60 min at 126 °C; not in-line steam sterilizable
  • This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Analysis Note

  • Bacterial Retention
  • TOC/Conductivity
  • After sterilization and a controlled water flush of 20 L, samples exhibited less than 500 ppb TOC per USP <64> and less than 1.3 µS/cm per USP <64> at 25 °C.
  • Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥2 L
Report incorrect product information
See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Authorized Distributor
Notifications This product is prohibited for export and is subject to export control laws and regulations of the U.S. Government. Please review our Export Policy.
Declaration
Declaration This product cannot be drop-shipped to residential areas. Please provide a business address upon purchasing.
All sales are final
All sales are final
  • These are made-to-order items.
  • This product is not eligible for return or exchange unless defective.
  • The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for Millipore items must be submitted within 14 days after the delivery date.

Technical Details

Reviews
Device ConfigurationCapsule
Connections, Inlet/Outlet16 mm (5/8 in.) Hose Barb
Connections, Vent/Drain1/4 in. Hose Barb with double O-ring seal
Housing MaterialPolypropylene (PP)
Maximum Differential Pressure, bar (psid)Forward: 6.9 bar (100 psid) intermittent at 25 °C; 5.5 bar (80 psid) at 25 °C; 1.0 bar (15 psid) at 80 °C. Reverse: 2.1 bar (30 psid) at 25 °C, intermittent
Maximum Inlet Pressure, bar (psi)6.9 bar (100 psi) intermittent at 25 °C; 5.5 bar (80 psi) at 23 °C; 2.75 bar (40 psi) at 60 °C; 1.0 bar (15 psi) at 80 °C
T-line/Gauge PortT-line
Quality LevelMQ400
Sterilization3 autoclave cycles of 60 min at 126 °C; not in-line steam sterilizable
Pore Size0.5 / 0.2 µm
Inlet ConnectionHose Barb
Outlet ConnectionHose Barb
Air Diffusion at 23 °C≤28.2 mL/min at 2.8 bar (40 psig) in water
Bubble Point at 23 °C≥4000 mbar (58 psig) air with water
Maximum Inlet Pressure (psig)80 psig
Maximum Differential Pressure80 psi (5.5 bar) continuous / 100 psi (6.9 bar) intermittent
Maximum Inlet Temperature25 °C
Cartridge Nominal Length10 in. (25 cm)
Length37.6 cm (14.8 in.)
Diameter10.7 cm (4.2 in.)
Filtration Area0.49 m2
Inlet to Outlet Width19.8 cm (7.8 in.)
Device Size10 in.
Inlet Connection Diameter5/8 in.
Outlet Connection Diameter5/8 in.
ChemistryPolyethersulfone (PES)
Device MaterialPolypropylene/Polysulfone
Seal MaterialSilicone (SI)
Support MaterialPolypropylene
Vent Cap MaterialPolypropylene (PP)
Product Details
Device ConfigurationCapsule
Connections, Inlet/Outlet16 mm (5/8 in.) Hose Barb
Connections, Vent/Drain1/4 in. Hose Barb with double O-ring seal
Housing MaterialPolypropylene (PP)
Maximum Differential Pressure, bar (psid)Forward: 6.9 bar (100 psid) intermittent at 25 °C; 5.5 bar (80 psid) at 25 °C; 1.0 bar (15 psid) at 80 °C. Reverse: 2.1 bar (30 psid) at 25 °C, intermittent
Maximum Inlet Pressure, bar (psi)6.9 bar (100 psi) intermittent at 25 °C; 5.5 bar (80 psi) at 23 °C; 2.75 bar (40 psi) at 60 °C; 1.0 bar (15 psi) at 80 °C
T-line/Gauge PortT-line
Quality LevelMQ400
Sterilization3 autoclave cycles of 60 min at 126 °C; not in-line steam sterilizable
Pore Size0.5 / 0.2 µm
Inlet ConnectionHose Barb
Outlet ConnectionHose Barb
Air Diffusion at 23 °C≤28.2 mL/min at 2.8 bar (40 psig) in water
Bubble Point at 23 °C≥4000 mbar (58 psig) air with water
Maximum Inlet Pressure (psig)80 psig
Maximum Differential Pressure80 psi (5.5 bar) continuous / 100 psi (6.9 bar) intermittent
Maximum Inlet Temperature25 °C
Cartridge Nominal Length10 in. (25 cm)
Length37.6 cm (14.8 in.)
Diameter10.7 cm (4.2 in.)
Filtration Area0.49 m2
Inlet to Outlet Width19.8 cm (7.8 in.)
Device Size10 in.
Inlet Connection Diameter5/8 in.
Outlet Connection Diameter5/8 in.
ChemistryPolyethersulfone (PES)
Device MaterialPolypropylene/Polysulfone
Seal MaterialSilicone (SI)
Support MaterialPolypropylene
Vent Cap MaterialPolypropylene (PP)
Return and Warranty

Return and Warranty

Please note that return requests for Millipore items must be submitted within 14 days after the delivery date.
Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Reviews

Prime Lab Med
1-855-590-6919
1-908-282-3482 (Intl.)