Buy HM Digital PS-203, Dual Display TDS Controller

info@PrimeLabMed.com

1-855-590-6919
1-908-282-3482 (Intl.)

PS-203 Includes Only:

Features:

Simultaneously monitors and controls the TDS levels of two water lines (e.g., the feed water and product water) for high-output commercial systems.
4-Digit large, bright L.E.D. displays
An alarm will sound if the TDS level rises above the user-set level for both lines

The PS-203 allows for continuous and simultaneous monitoring and control of TDS levels on two water lines for high-output commercial systems.

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Range	0 – 9999ppm
Accuracy	±2%
Conversion Factor	NaCl (avg. 0.5)
Resolution	0.1ppm (0-99.9), 1ppm (100-9999)
ATC	Yes (1-60°C)
Calibration	Up and Down push button Digital calibration
Setting	Controlled by on-screen up/down buttons
Relay Control	The unit will open or close a circuit via dry contacts when the ppm level of either sensor reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device. Each relay control is independent.
Relay Voltage	5V
Alarm	Optional steady beep (set by user), one for each set point
Probe	1/2" NPTF
Cable Length	3 meter (9.8 ft) shielded cable
Display	4-Digit bright FND dual displays
Power Source	AC 110V/230V, +10% Vac; 50/60Hz
Dimensions	9.6 x 9.6 x 12.6 cm (3.78 x 3.78 x 4.96 in.)
Monitor Weight	476 g (1 lb 0.8 oz)

Range	0 – 9999ppm
Accuracy	±2%
Conversion Factor	NaCl (avg. 0.5)
Resolution	0.1ppm (0-99.9), 1ppm (100-9999)
ATC	Yes (1-60°C)
Calibration	Up and Down push button Digital calibration
Setting	Controlled by on-screen up/down buttons
Relay Control	The unit will open or close a circuit via dry contacts when the ppm level of either sensor reaches or exceeds the control setting (simple switch). It can be used to control a pump, solenoid valve or other device. Each relay control is independent.
Relay Voltage	5V
Alarm	Optional steady beep (set by user), one for each set point
Probe	1/2" NPTF
Cable Length	3 meter (9.8 ft) shielded cable
Display	4-Digit bright FND dual displays
Power Source	AC 110V/230V, +10% Vac; 50/60Hz
Dimensions	9.6 x 9.6 x 12.6 cm (3.78 x 3.78 x 4.96 in.)
Monitor Weight	476 g (1 lb 0.8 oz)

Note: Please read description carefully. Do not base your order on the picture presented.