Buy Millipore KHGES1TTT1, Opticap Filter XLT 10 SHC, Inlet 1.5", 10"

info@PrimeLabMed.com

1-855-590-6919
1-908-282-3482 (Intl.)

Pictures shown are for illustrative purpose only. Actual product may vary

Options and Related Products

Diameter:: Diameter: Inlet Connection 1.5"

Millipore, KHGES1TTT1, Opticap Filter XLT 10 Express SHC, Sterile, Inlet Connection Diameter 1.5", Pore Size 0.5/0.2 Um, Cartridge Nominal Length 10"

Features:

Organism Retention: Microorganism
Mode of Action: Filtration (size exclusion)
Application: BioProcessing
Intended Use: Reduction or removal of microorganism/bioburden
Instructions for Use: Please refer installation section of OPTICAP® XL Capsules and OPTICAP® XLT Capsules user guide
Storage Statement: Store in dry location
Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Preparation Note

Sterilization Method
3 autoclave cycles of 60 min at 123 °C; not in-line steam sterilizable
This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Analysis Note

Bacterial Retention
TOC/Conductivity
After sterilization and a controlled water flush of 21 L, samples exhibited less than 500 ppb TOC per USP <64> and less than 1.3 µS/cm per USP <64> at 25 °C.
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥2 L

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Notifications

Notifications This product is prohibited for export and is subject to export control laws and regulations of the U.S. Government. Please review our Export Policy.

Declaration

Declaration This product cannot be drop-shipped to residential areas. Please provide a business address upon purchasing.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Technical Details

Reviews

Device Configuration	Capsule
Connections, Inlet/Outlet	38 mm (1-1/2 in.) Sanitary Flange
Connections, Vent/Drain	1/4 in. Hose Barb with double O-ring seal
Housing Material	Polypropylene (PP)
Maximum Differential Pressure, bar (psid)	Forward: 6.9 bar (100 psid) intermittent at 25 °C; 5.5 bar (80 psid) at 25 °C; 1.0 bar (15 psid) at 80 °C. Reverse: 2.1 bar (30 psid) at 25 °C, intermittent
Maximum Inlet Pressure, bar (psi)	6.9 bar (100 psi) intermittent at 25 °C; 5.5 bar (80 psi) at 25 °C; 2.75 bar (40 psi) at 60 °C; 1.0 bar (15 psi) at 80 °C
T-line/Gauge Port	T-line
Quality Level	MQ400
Sterility	Sterile
Sterilization	3 autoclave cycles of 60 min at 123 °C; not in-line steam sterilizable
Wettability	Hydrophilic
Pore Size	0.5 / 0.2 µm
Inlet Connection	Sanitary Flange
Outlet Connection	Sanitary Flange
Air Diffusion at 23 °C	≤31.2 mL/min at 2.8 bar (40 psig) in water
Bubble Point at 23 °C	≥4000 mbar (58 psig) air with water
Maximum Inlet Pressure (psig)	80 psig
Maximum Differential Pressure	80 psi (5.5 bar) continuous / 100 psi (6.9 bar) intermittent
Maximum Inlet Temperature	25 °C
Cartridge Nominal Length	10 in. (25 cm)
Length	37.6 cm (14.8 in.)
Diameter	10.7 cm (4.2 in.)
Filtration Area	0.54 m2
Inlet to Outlet Width	15.2 cm (6.0 in.)
Device Size	10 in.
Inlet Connection Diameter	1-1/2 in.
Outlet Connection Diameter	1-1/2 in.
Chemistry	Polyethersulfone (PES)
Device Material	Polypropylene/Polysulfone
Seal Material	Silicone (SI)
Support Material	Polyester
Vent Cap Material	Polypropylene (PP)

Product Details

Device Configuration	Capsule
Connections, Inlet/Outlet	38 mm (1-1/2 in.) Sanitary Flange
Connections, Vent/Drain	1/4 in. Hose Barb with double O-ring seal
Housing Material	Polypropylene (PP)
Maximum Differential Pressure, bar (psid)	Forward: 6.9 bar (100 psid) intermittent at 25 °C; 5.5 bar (80 psid) at 25 °C; 1.0 bar (15 psid) at 80 °C. Reverse: 2.1 bar (30 psid) at 25 °C, intermittent
Maximum Inlet Pressure, bar (psi)	6.9 bar (100 psi) intermittent at 25 °C; 5.5 bar (80 psi) at 25 °C; 2.75 bar (40 psi) at 60 °C; 1.0 bar (15 psi) at 80 °C
T-line/Gauge Port	T-line
Quality Level	MQ400
Sterility	Sterile
Sterilization	3 autoclave cycles of 60 min at 123 °C; not in-line steam sterilizable
Wettability	Hydrophilic
Pore Size	0.5 / 0.2 µm
Inlet Connection	Sanitary Flange
Outlet Connection	Sanitary Flange
Air Diffusion at 23 °C	≤31.2 mL/min at 2.8 bar (40 psig) in water
Bubble Point at 23 °C	≥4000 mbar (58 psig) air with water
Maximum Inlet Pressure (psig)	80 psig
Maximum Differential Pressure	80 psi (5.5 bar) continuous / 100 psi (6.9 bar) intermittent
Maximum Inlet Temperature	25 °C
Cartridge Nominal Length	10 in. (25 cm)
Length	37.6 cm (14.8 in.)
Diameter	10.7 cm (4.2 in.)
Filtration Area	0.54 m2
Inlet to Outlet Width	15.2 cm (6.0 in.)
Device Size	10 in.
Inlet Connection Diameter	1-1/2 in.
Outlet Connection Diameter	1-1/2 in.
Chemistry	Polyethersulfone (PES)
Device Material	Polypropylene/Polysulfone
Seal Material	Silicone (SI)
Support Material	Polyester
Vent Cap Material	Polypropylene (PP)

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Millipore KHGES1TTT1 Opticap Filter XLT 10 SHC, Inlet 1.5", 10"

Identifiers

Technical Details

Reviews