Buy Millipore KPGEA2TTH1, Opticap Filter XLT 20 PHF, Inlet 1.5", 20"

info@PrimeLabMed.com

1-855-590-6919
1-908-282-3482 (Intl.)

Pictures shown are for illustrative purpose only. Actual product may vary

Options and Related Products

Millipore, KPGEA2TTH1, Opticap Filter XLT 20 Express PHF Autoclavable 0.2 Um 1-1/2" TC-5/8" HB

Features:

Organism Retention: Microorganism
Mode of Action: Filtration (size exclusion)
Application: BioProcessing
Intended Use: Reduction or removal of microorganism/bioburden
Instructions for Use: Please refer wetting instructions of Filters with MILLIPORE EXPRESS Membrane user guide
Storage Statement: Please refer Filters with MILLIPORE EXPRESS Membrane user guide
Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Preparation Note

Sterilization Method
3 autoclave cycles of 60 min at 126 °C; not in-line steam sterilizable
This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Analysis Note

Bacterial Retention
Samples of membrane used in this filter were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration
TOC/Conductivity
After sterilization and a controlled water flush of 20 L, samples exhibited less than 500 ppb TOC per USP <64> and less than 1.3 µS/cm per USP <64> at 25 °C.
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥2 L

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Device Configuration	Capsule
Connections, Inlet/Outlet	38 mm (1-1/2 in.) Sanitary Flange/16 mm (5/8 in.) Hose Barb
Connections, Vent/Drain	1/4 in. Hose Barb with double O-ring seal
Housing Material	Polypropylene (PP)
Maximum Inlet Pressure, bar (psi)	5.5 bar (80 psi) at 25 °C; 2.75 bar (40 psi) at 60 °C; 1.0 bar (15 psi) at 80 °C
T-line/Gauge Port	T-line
Quality Level	MQ400
Sterilization	3 autoclave cycles of 60 min at 126 °C; not in-line steam sterilizable
Pore Size	0.2 µm
Inlet Connection	Sanitary Flange
Outlet Connection	Hose Barb
Air Diffusion at 23 °C	≤60 mL/min at 2.8 bar (40 psig) in water
Maximum Inlet Pressure (psig)	80 psig
Maximum Differential Pressure	5500 mbar (80 psi) at 25 °C; 1000 bar (15 psi) at 80 °C
Maximum Inlet Temperature	25 °C
Cartridge Nominal Length	20 in. (50 cm)
Length	62.5 cm (24.6 in.)
Diameter	10.7 cm (4.2 in.)
Filtration Area	1.08 m2
Inlet to Outlet Width	17.5 cm (6.9 in.)
Device Size	20 in.
Inlet Connection Diameter	1-1/2 in.
Outlet Connection Diameter	5/8 in.
Chemistry	Polyethersulfone (PES)
Device Material	Polypropylene/Polysulfone
Seal Material	Silicone (SI)
Support Material	Polypropylene
Vent Cap Material	Polypropylene (PP)

Device Configuration	Capsule
Connections, Inlet/Outlet	38 mm (1-1/2 in.) Sanitary Flange/16 mm (5/8 in.) Hose Barb
Connections, Vent/Drain	1/4 in. Hose Barb with double O-ring seal
Housing Material	Polypropylene (PP)
Maximum Inlet Pressure, bar (psi)	5.5 bar (80 psi) at 25 °C; 2.75 bar (40 psi) at 60 °C; 1.0 bar (15 psi) at 80 °C
T-line/Gauge Port	T-line
Quality Level	MQ400
Sterilization	3 autoclave cycles of 60 min at 126 °C; not in-line steam sterilizable
Pore Size	0.2 µm
Inlet Connection	Sanitary Flange
Outlet Connection	Hose Barb
Air Diffusion at 23 °C	≤60 mL/min at 2.8 bar (40 psig) in water
Maximum Inlet Pressure (psig)	80 psig
Maximum Differential Pressure	5500 mbar (80 psi) at 25 °C; 1000 bar (15 psi) at 80 °C
Maximum Inlet Temperature	25 °C
Cartridge Nominal Length	20 in. (50 cm)
Length	62.5 cm (24.6 in.)
Diameter	10.7 cm (4.2 in.)
Filtration Area	1.08 m2
Inlet to Outlet Width	17.5 cm (6.9 in.)
Device Size	20 in.
Inlet Connection Diameter	1-1/2 in.
Outlet Connection Diameter	5/8 in.
Chemistry	Polyethersulfone (PES)
Device Material	Polypropylene/Polysulfone
Seal Material	Silicone (SI)
Support Material	Polypropylene
Vent Cap Material	Polypropylene (PP)

Note: Please read description carefully. Do not base your order on the picture presented.