Prime Lab Med
1-855-590-6919
1-908-282-3482 (Intl.)

Millipore KPGEG03HH3 Opticap Filter XL 3 PHF, Inlet 9/16", 3"

Diameter: Inlet Connection 9/16"
  • Brand Millipore
  • Part # KPGEG03HH3
  • Model # Opticap
  • Condition
    Brand New
  • Not for Export
Availability
Typically In Stock
Export
Not for Export
Check Availability
Quantity
Notify Me if The Price Drops
Share:

Options and Related Products

Diameter:
Diameter: Inlet Connection 9/16"

Millipore, KPGEG03HH3, Opticap Filter XL 3 Express PHF Gamma Compatible 0.2 Um 9/16" HB/HB

Features:

  • Organism Retention: Microorganism
  • Mode of Action: Filtration (size exclusion)
  • Application: BioProcessing
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer wetting instructions of Filters with MILLIPORE EXPRESS® Membrane user guide
  • Storage Statement: Please refer Filters with MILLIPORE EXPRESS® Membrane user guide
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Preparation Note

  • Sterilization Method
  • 3 autoclave cycles of 60 min at 123 °C; not in-line steam sterilizable
  • This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Analysis Note

  • Bacterial Retention
  • Samples of membrane used in this filter were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration
  • TOC/Conductivity
  • After sterilization and a controlled water flush of 3.5 L, samples exhibited less than 500 ppb TOC per USP <64> and less than 1.3 µS/cm per USP <64> at 25 °C.
  • Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥1 L
Report incorrect product information
See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Authorized Distributor
Notifications This product is prohibited for export and is subject to export control laws and regulations of the U.S. Government. Please review our Export Policy.
Declaration
Declaration This product cannot be drop-shipped to residential areas. Please provide a business address upon purchasing.
All sales are final
All sales are final
  • These are made-to-order items.
  • This product is not eligible for return or exchange unless defective.
  • The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for Millipore items must be submitted within 14 days after the delivery date.

Technical Details

Reviews
Device ConfigurationCapsule
Connections, Inlet/Outlet14 mm (9/16 in.) Hose Barb
Connections, Vent/Drain1/4 in. Hose Barb with double O-ring seal
Housing MaterialPolypropylene (PP)
Maximum Inlet Pressure, bar (psi)5.5 bar (80 psi) at 25 °C; 2.75 bar (40 psi) at 60 °C; 1.0 bar (15 psi) at 80 °C
Quality LevelMQ400
Bacterial EndotoxinsAqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
SterilityGamma
Sterilization3 autoclave cycles of 60 min at 123 °C; not in-line steam sterilizable
WettabilityHydrophilic
Pore Size0.2 µm
Inlet ConnectionHose Barb
Outlet ConnectionHose Barb
Air Diffusion at 23 °C≤9.5 mL/min at 2.8 bar (40 psig) in water
Maximum Inlet Pressure (psig)80 psig
Maximum Differential Pressure5500 mbar (80 psi) at 25 °C; 1000 bar (15 psi) at 80 °C
Maximum Inlet Temperature25 °C
Cartridge Nominal Length3 in. (7.5 cm)
Length17.3 cm (6.8 in.)
Diameter10.7 cm (4.2 in.)
Filtration Area0.17 m2
Inlet to Outlet Width17.3 cm (6.8 in.)
Device Size3 in.
Inlet Connection Diameter9/16 in.
Outlet Connection Diameter9/16 in.
ChemistryPolyethersulfone (PES)
Device MaterialGamma stable polypropylene/Polysulfone
Seal MaterialSilicone (SI)
Support MaterialPolyester
Vent Cap MaterialPolypropylene (PP)
Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details
Device ConfigurationCapsule
Connections, Inlet/Outlet14 mm (9/16 in.) Hose Barb
Connections, Vent/Drain1/4 in. Hose Barb with double O-ring seal
Housing MaterialPolypropylene (PP)
Maximum Inlet Pressure, bar (psi)5.5 bar (80 psi) at 25 °C; 2.75 bar (40 psi) at 60 °C; 1.0 bar (15 psi) at 80 °C
Quality LevelMQ400
Bacterial EndotoxinsAqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
SterilityGamma
Sterilization3 autoclave cycles of 60 min at 123 °C; not in-line steam sterilizable
WettabilityHydrophilic
Pore Size0.2 µm
Inlet ConnectionHose Barb
Outlet ConnectionHose Barb
Air Diffusion at 23 °C≤9.5 mL/min at 2.8 bar (40 psig) in water
Maximum Inlet Pressure (psig)80 psig
Maximum Differential Pressure5500 mbar (80 psi) at 25 °C; 1000 bar (15 psi) at 80 °C
Maximum Inlet Temperature25 °C
Cartridge Nominal Length3 in. (7.5 cm)
Length17.3 cm (6.8 in.)
Diameter10.7 cm (4.2 in.)
Filtration Area0.17 m2
Inlet to Outlet Width17.3 cm (6.8 in.)
Device Size3 in.
Inlet Connection Diameter9/16 in.
Outlet Connection Diameter9/16 in.
ChemistryPolyethersulfone (PES)
Device MaterialGamma stable polypropylene/Polysulfone
Seal MaterialSilicone (SI)
Support MaterialPolyester
Vent Cap MaterialPolypropylene (PP)
Return and Warranty

Return and Warranty

Please note that return requests for Millipore items must be submitted within 14 days after the delivery date.
Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Reviews

Prime Lab Med
1-855-590-6919
1-908-282-3482 (Intl.)