Buy Millipore KPGEG03TT3, Opticap Filter XL 3 PHF, Inlet 1.5", 3"

info@PrimeLabMed.com

1-855-590-6919
1-908-282-3482 (Intl.)

Pictures shown are for illustrative purpose only. Actual product may vary

Options and Related Products

Diameter:: Diameter: Inlet Connection 1.5"

Millipore, KPGEG03TT3, Opticap Filter XL 3 Express PHF Gamma Compatible 0.2 Um 1-1/2" TC/TC

Features:

Organism Retention: Microorganism
Mode of Action: Filtration (size exclusion)
Application: BioProcessing
Intended Use: Reduction or removal of microorganism/bioburden
Instructions for Use: Please refer wetting instructions of Filters with MILLIPORE EXPRESS Membrane user guide
Storage Statement: Please refer Filters with MILLIPORE EXPRESS Membrane user guide
Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Preparation Note

Sterilization Method
3 autoclave cycles of 60 min at 123 °C; not in-line steam sterilizable
This product was manufactured with a Millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Analysis Note

Bacterial Retention
Samples of membrane used in this filter were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration
TOC/Conductivity
After sterilization and a controlled water flush of 3.5 L, samples exhibited less than 500 ppb TOC per USP <64> and less than 1.3 µS/cm per USP <64> at 25 °C.
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥1 L

Report incorrect product information

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Notifications

Notifications This product is prohibited for export and is subject to export control laws and regulations of the U.S. Government. Please review our Export Policy.

Declaration

Declaration This product cannot be drop-shipped to residential areas. Please provide a business address upon purchasing.

All sales are final

These are made-to-order items.
This product is not eligible for return or exchange unless defective.
The average lead-time is 1 or 2 weeks.

Return and Warranty

Please note that return requests for Millipore items must be submitted within 14 days after the delivery date.

Technical Details

Reviews

Device Configuration	Capsule
Connections, Inlet/Outlet	38 mm (1-1/2 in.) Sanitary Flange
Connections, Vent/Drain	1/4 in. Hose Barb with double O-ring seal
Housing Material	Polypropylene (PP)
Maximum Inlet Pressure, bar (psi)	5.5 bar (80 psi) at 25 °C; 2.75 bar (40 psi) at 60 °C; 1.0 bar (15 psi) at 80 °C
Quality Level	MQ400
Sterility	Gamma
Sterilization	3 autoclave cycles of 60 min at 123 °C; not in-line steam sterilizable
Wettability	Hydrophilic
Pore Size	0.2 µm
Inlet Connection	Sanitary Flange
Outlet Connection	Sanitary Flange
Air Diffusion at 23 °C	≤9.5 mL/min at 2.8 bar (40 psig) in water
Maximum Inlet Pressure (psig)	80 psig
Maximum Differential Pressure	5500 mbar (80 psi) at 25 °C; 1000 bar (15 psi) at 80 °C
Maximum Inlet Temperature	25 °C
Cartridge Nominal Length	3 in. (7.5 cm)
Length	17.3 cm (6.8 in.)
Diameter	10.7 cm (4.2 in.)
Filtration Area	0.17 m2
Inlet to Outlet Width	17.3 cm (6.8 in.)
Device Size	3 in.
Inlet Connection Diameter	1-1/2 in.
Outlet Connection Diameter	1-1/2 in.
Chemistry	Polyethersulfone (PES)
Device Material	Gamma stable polypropylene/Polysulfone
Seal Material	Silicone (SI)
Support Material	Polyester
Vent Cap Material	Polypropylene (PP)

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Device Configuration	Capsule
Connections, Inlet/Outlet	38 mm (1-1/2 in.) Sanitary Flange
Connections, Vent/Drain	1/4 in. Hose Barb with double O-ring seal
Housing Material	Polypropylene (PP)
Maximum Inlet Pressure, bar (psi)	5.5 bar (80 psi) at 25 °C; 2.75 bar (40 psi) at 60 °C; 1.0 bar (15 psi) at 80 °C
Quality Level	MQ400
Sterility	Gamma
Sterilization	3 autoclave cycles of 60 min at 123 °C; not in-line steam sterilizable
Wettability	Hydrophilic
Pore Size	0.2 µm
Inlet Connection	Sanitary Flange
Outlet Connection	Sanitary Flange
Air Diffusion at 23 °C	≤9.5 mL/min at 2.8 bar (40 psig) in water
Maximum Inlet Pressure (psig)	80 psig
Maximum Differential Pressure	5500 mbar (80 psi) at 25 °C; 1000 bar (15 psi) at 80 °C
Maximum Inlet Temperature	25 °C
Cartridge Nominal Length	3 in. (7.5 cm)
Length	17.3 cm (6.8 in.)
Diameter	10.7 cm (4.2 in.)
Filtration Area	0.17 m2
Inlet to Outlet Width	17.3 cm (6.8 in.)
Device Size	3 in.
Inlet Connection Diameter	1-1/2 in.
Outlet Connection Diameter	1-1/2 in.
Chemistry	Polyethersulfone (PES)
Device Material	Gamma stable polypropylene/Polysulfone
Seal Material	Silicone (SI)
Support Material	Polyester
Vent Cap Material	Polypropylene (PP)

Return and Warranty

Please note that return requests for Millipore items must be submitted within 14 days after the delivery date.

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Millipore KPGEG03TT3 Opticap Filter XL 3 PHF, Inlet 1.5", 3"

Identifiers

Return and Warranty

Technical Details

Return and Warranty

Reviews