Buy Millipore SGEPA47HH3, Optiscale Capsule Filter, SHF 0.2 um 1/4" HB/HB

info@PrimeLabMed.com

1-855-590-6919
1-908-282-3482 (Intl.)

Options and Related Products

Millipore, SGEPA47HH3, Optiscale Capsule Filter, 47mm Express SHF 0.2 Um 1/4" HB/HB

Features:

Organism Retention: Microorganism
Mode of Action: Filtration (size exclusion)
Application: BioProcessing
Intended Use: Reduction or removal of microorganism/bioburden
Instructions for Use: Please refer installation and wetting sections of OPTISCALE-25 user guide
Storage Statement: Please refer to OPTISCALE-25 user guide
Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Preparation Note

Analysis Note

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥100 mL

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Device Configuration	Capsule
Connections, Inlet/Outlet	6 mm (1/4 in.) Hose Barb
Maximum Inlet Pressure, bar (psi)	5.5 bar (80 psi) at 25 °C
Quality Level	MQ400
Sterilization	3 autoclave cycles of 60 min at 126 °C
Wettability	Hydrophilic
Pore Size	0.2 µm
Inlet Connection	Hose Barb
Outlet Connection	Hose Barb
Bubble Point at 23 °C	≥4000 mbar (58 psig) air with water
Indirect Food Additive	All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Maximum Inlet Pressure (psig)	80 psig
Maximum Inlet Temperature	25 °C
Cartridge Nominal Length	3.70 in. (94 mm)
Length	9.4 cm (3.70 in.)
Diameter	6.9 cm (2.7 in.)
Filtration Area	17.7 cm2
Inlet Connection Diameter	1/4 in.
Outlet Connection Diameter	1/4 in.
Chemistry	Polyethersulfone (PES)
Device Material	Polycarbonate
Seal Material	Fluoroelastomer (FKM)
Support Material	Polypropylene
Vent Cap Material	Polyvinylidene fluoride (PVDF)

Device Configuration	Capsule
Connections, Inlet/Outlet	6 mm (1/4 in.) Hose Barb
Maximum Inlet Pressure, bar (psi)	5.5 bar (80 psi) at 25 °C
Quality Level	MQ400
Sterilization	3 autoclave cycles of 60 min at 126 °C
Wettability	Hydrophilic
Pore Size	0.2 µm
Inlet Connection	Hose Barb
Outlet Connection	Hose Barb
Bubble Point at 23 °C	≥4000 mbar (58 psig) air with water
Indirect Food Additive	All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Maximum Inlet Pressure (psig)	80 psig
Maximum Inlet Temperature	25 °C
Cartridge Nominal Length	3.70 in. (94 mm)
Length	9.4 cm (3.70 in.)
Diameter	6.9 cm (2.7 in.)
Filtration Area	17.7 cm2
Inlet Connection Diameter	1/4 in.
Outlet Connection Diameter	1/4 in.
Chemistry	Polyethersulfone (PES)
Device Material	Polycarbonate
Seal Material	Fluoroelastomer (FKM)
Support Material	Polypropylene
Vent Cap Material	Polyvinylidene fluoride (PVDF)

Note: Please read description carefully. Do not base your order on the picture presented.